© 2005, 08, 10
Blue Ox Division, Automatic Equipment Mfg. Co. • One Mill Road,
Industrial Park • Pender, Nebraska 68047 • Phone 402-385-3051 • Fax 402-385-3360 •
www.blueox.com
Page 4 of 6
292-2689 Rev. C 2/16/10
Installation
Requirements for placement of BedSaver
TM
Side Plates
The BedSaver
TM
Side Plates are mounted with the beveled corners located on the bottom and toward the rear of the tow
vehicle.
Note: You will find a label on each Side Plate. The labels should be placed to the outside of the hitch.
Step 1
Referring to
Figure 1 & 2
below and using two of the bolts and Nylok lock nuts supplied with the kit, position the Left Side
Plate onto left hitch vertical support such that the top hole pairs of the Side Plate align with the top pair of bolt holes in the
left hitch vertical support. Insert the two bolts with the shanks inward and install two nuts. Do not tighten the nuts.
Step 2
Repeat
Step 1
for the right side plate
Figure 1-
Side Plate Placement
Figure 2-
Side Plate Installed
