background image

The lightning flash with an arrowhead symbol

within an equilateral triangle is intended to alert 

the user to the presence of uninsulated 

dangerous voltage within the product's enclosure 

that may be of sufficient magnitude to constitute

a risk of electric shock to persons.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle 
is intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying 
the product.

REGULATORY INFORMATION : FCC Part 15

WARNING - Do not install this equipment in a confined
space such as a bookcase or similar unit.

Disposal of your old appliance
1. When this crossed-out wheeled bin symbol

    is attached to a product it means the product

    is covered by the European Directive 

    2002/96/EC
2. All electrical and electronic products should

    be disposed of separately from the municipal

    waste stream via designated collection facilities

    appointed by the government or the local 

    authorities
3. The correct disposal of your old appliance

    will help prevent potential negative conse-

    quences for the environment and human 

    health
4. For more detailed information about disposal

    of your old appliance, please contact your

    city office, waste disposal service or the shop

    where you purchased the product.

To disconnect power from the mains, pull out the main
cord plug. When installing the product, ensure that the 
plug is easily accessible.

WARNING - Wiring methods shall be in accordance with
the National Electric Code, ANSI/NFPA 70.

WARNING - To reduce a risk of fire or electric shock, do
not expose this product to rain or moisture.
CAUTION - This installation should be made by a qualified
service personrel and should conform to all local codes.
CAUTION - To avoid electrocal shock, do not open the 
cabinet. Refer servicing to qualified personnel only.

CAUTION - The apparatus should not be exposed to
water (dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on the apparatus.

WARNING - This is a class A product. In a domestic
environment this product may cause radio interference 
in which case the user may be required to take adequate
measures.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION :

FCC WARING - This equipment may generate or use 
radio frequency energy. Changes or modifications to 
this equipment may cause harmful interference unless 
the modifications are expressly approved in the instruction

manual. The user could lose the authority to operate this 
equipment if an unauthorized change or modification is made.

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when

the equipment is operated in a commercial environment

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference 

to radio communications. Operation of this equipment 

in a residential area is likely to cause harmful interference

in which case the user will be required to correct the 

interference at his own expense.
-      A suitable conduit entries, knock-outs or glands shall

       be provided in the cable entries of this product in the

       end use.

-     Holes in metal, through which insulated wires pass,

       shall have smooth well rounded surfaces or shall 

       be provided with brushings.

03

Summary of Contents for BMH-S128




















Reviews: