Blue Ice Azzurri Classico CM631, Service Manual

Page: 75 / 96

Repair
4. Put the already installed epicyclic gear
frame A into the gearbox, put 1 filler piece
onto epicyclic gear frame A. 5. Put the already installed epicyclic gear
frame B into gearbox.
4 5
6. Put the steel ball support and 34 roll steel
ball into gearbox. 7. Install 3 grinder antivibration pads and 3
antivibration bushes into coffee powder
container.
6 7
8. Install the coffee powder container into the
gearbox, the bigger hook on the coffee
powder container should compare to the
bigger groove. Screw tightly.
9. Install the line pencil into the grinder motor,
red line correspond to the red mark.
8 9
1
Note: The installation direction for
the grinder antivibration pads and 3
antivibration bushes.
73
www.blueicecreammachine.co.uk
72
Repair
1. When install the NTC on the thermoblock,
cover NTC with silicone grease and fasten it.
1
1. Assemble the grinder motor and gearbox together, and screw them tightly. The screw should be
covered with loctite. The teeth of the gearbox should be coated with oil(MI-setral-61B). The red mark
place should correspond to one hole of the gearbox.
1 1
2. Install 3 epicyclic gear A and 3 epicyclic
gear pin A into epicyclic gear support A,
and coat with oil(MI-setral-61B). 3. Install 3 epicyclic gear B and 3 epicyclic
gear pin A into epicyclic gear support B, and
coat with oil(MI-setral-61B).
2 3
Thermoblock
Grinder group
1
Service Manual
Intelligent Fresh Ground Coffee Machine
KLM1601