Blue Giant EPJ-60R, Owner'S Manual

Page: 25 / 94

On the Parameters screen ( Figure 4-15 ) click on
Receive
button. The screen will then list the
Parame-
ter Name
along with the current
Parameter Value
.
Use the
-
and
+
to change the parameter.
Figure 4-15 Parameters Screen
If you feel that one of the other parameters has been
changed accedently, check that setting against
Table
4-3 .
Click on button the
Store
button to save the
changes.Click on button the
Store
button to save the
changes.
Table 4-2 Adjustment Settings
Table 4-3 Factory Setting
Code Function Setting
0 ACCELER. DELAY 24
11 RELEASE BRAKING 20
220 TILLER BRAKING 3
12 INVERS. BRAKING 20
237 DECEL. BRAKING 90
30 MAX SPEED FORW 100
31 MAX SPEED BACK 69
Code Name Position Menu Value Scaled
Value
Code
Open
Node
0 ACCELER. DELAY 0 0 24 2.4 0 2
165 BACKING ACCEL. 1 0 10 1 0 2
11 RELEASE BRAKING 2 0 20 2 0 2
220 TILLER BRAKING 3 0 3 0.3 0 2
12 INVERS. BRAKING 4 0 20 2 0 2
237 DECEL. BRAKING 5 0 90 9 0 2
13 PEDAL BRAKING 6 0 3 0.3 0 2
16 SPEED LIMIT BRK. 7 0 28 2.8 0 2
164 BACKING DECEL. 8 0 10 1 0 2
30 MAX SPEED FORWARD 9 0 10 100% 0 2
31 MAX SPEED BACK 10 0 69 69% 0 2
29 CURVE CUTBACK 11 0 100 100% 0 2
252 DEAD ANGLE 12 0 2 LEVEL=2 0 2
48 HYD SPEED FINE 13 0 16 16% 0 2
49 HYDRO COMPENS. 14 0 10 10% 0 2
21 CUTBACK SPEED 1 15 0 58 58% 0 2
181 H&S CUTBACK/CB2 16 0 18 18% 0 2
217 FREQUENCY CREEP 17 0 12 1.20 Hz 0 2
63 MAXIMUM CURRENT 18 0 100 100% 0 2
209 ACC SMOOTH 19 0 10 1 0 2
210 INV SMOOTH 20 0 10 1 0 2
211 STOP SMOOTH 21 0 10 10Hz 0 2
213 BRK SMOOTH 22 0 10 1 0 2