BGNR-30 POWERED WALKIE REACH STACKER—OWNER’S MANUAL
4
ISSUE DATE: MARCH 16, 2016 REV.0 (PART # 038-969E)
CORRECT USE AND APPLICATION
The Reach Truck described in the present operator manual is an industrial Reach Truck designed for lifting and transporting load units.
It must be used, operated and serviced in accordance with the present instructions. Any other type of use is beyond the scope of
application and can result in damage to personnel, the Reach Truck or property. In particular, avoid overloading the Reach Truck with
loads which are too heavy or placed on one side. The data plate attached to the Reach Truck or the load diagram are binding for the
maximum load capacity. The Reach Truck must not be used in fire or explosion endangered areas, or areas threatened by corrosion or
excessive dust.
PROPRIETOR RESPONSIBILITIES
For the purposes of the present operator manual the “proprietor” is defined as any natural or legal person who either uses the Reach
Truck himself, or on whose behalf it is used. In special cases (e.g. leasing or renting) the proprietor is considered the person who, in
accordance with existing contractual agreements between the owner and user of the Reach Truck, is charged with operational duties.
The proprietor must ensure that the Reach Truck is used only for the purpose it is intended for and that danger to life and limb of the
user and third parties are excluded. Furthermore, accident prevention regulations, safety regulations and operating, servicing and repair
guidelines must be followed. The proprietor must ensure that all Reach Truck users have read and understood this operator manual.
Failure to comply with the operator manual shall invalidate the warranty. The same applies if improper work is carried out on the Reach
Truck by the customer or third parties without the permission of the manufacturer’s customer service department.
ADDING ACCESSORIES
The mounting or installation of additional equipment which affects or enhances the performance of the Reach Truck requires the written
permission of the manufacturer. Local authority approval may also need to be obtained. Local authority approval does not however
constitute the manufacturer’s approval.
TABLE OF CONTENTS CON’T.
7.3 CHARGING THE BATTERY
20
7.4 BATTERY REMOVAL AND INSTALLATION
21
7.5 BATTERY MAINTENANCE
21
7.5 BATTERY DISPOSAL
21
8.0 REACH TRUCK MAINTENANCE
22
8.1 OPERATIONAL SAFETY AND ENVIRONMENTAL PROTECTION
22
8.2 MAINTENANCE SAFETY REGULATIONS
22
8.3 SERVICING AND INSPECTION
23
8.3.1 MAINTENANCE CHECK LIST
23
8.3.2 LUBRICATION SCHEDULE
25
8.3.3 CONSUMABLES
26
8.3.4 MAINTENANCE INSTRUCTIONS
26
8.4 DECOMMISSIONING THE REACH TRUCK
27
8.4.1 PRIOR TO DECOMMISSIONING
28
8.4.2 RESTORING THE REACH TRUCK TO OPERATION AFTER DECOMMISSIONING
28
8.5 SAFETY CHECKS TO BE PERFORMED AT REGULAR INTERVALS
28
9.0 TROUBLESHOOTING
29
