Content and unpacking
After taking off the lid of the wooden crate by removing the screws please
take care to have read this manual. Remove the side walls of the crate as
this will allow full access to the Drum filter. (The crate is made high grade
plywood that you may choose to save for future use in other applications
that you may desire.)
After the box walls are taken down, remove the tape from the lid all around
and open the RDF drum. Remove all of the packing materials from the filter
and the float tube. The float tube should then be inserted onto the float tube
pin very carefully. The raising and lowering of the float tube triggers the
wash cycle.
Check to see that the float tube can move up and down the pin in a
smoothly fashion.
Also check to see that the drum can rotate by pushing it forwards by hand.
Take care that you only move the drum in the direction of the arrow located
on the filter beside the drum. When rotating the drum by hand a clicking
sound will be emitted.
This direction ONLY.
Floating Unit
2