5
BLUE
DRY
- HIGH SPEED HAND DRYER
4. GENERAL SAFETY INFORMATION
WARNING -
This product is intended for installation by a qualified service person.
Use eligible solid conductor for wiring (1.5mm² for 220-240V).
WARNING -
Disconnect power at the service breaker before installing or servicing.
WARNING -
All units must be supplied with a 3-wire service. The ground wire must
be connected to the dryer’s backplate.
DANGER -
Failure to properly ground unit could result in severe electrical shock.
5. INSTALLATION STEPS
1.
Tape the installation template to the appropriate location on the mounting
surface. Drill eight (8) holes at marked locations.(fig. 1).
2.
Remove template and insert eight (8) plastic anchors (supplied) into drilled holes (fig.2).
3.
Insert eight (8) screws (supplied) to fix backplate into top plastic anchors (fig.3).
4.
Hang the dryer on the base plate (fig. 4).
5.
Use key (supplied) to unlock and withdraw drawer. Screw (supplied) through the
holes at backplate bottom. Insert the drawer back and lock the security screw (fig.5).
6.
Connect power and stand by.
6. OPERATION
•
Place your hands through the opening.
•
Rub your hands together in the air flow.
•
Remove hands and dryer will stop automatically.
