Blue Diamond EXTREME DUTY SNOW BLOWER 68, Operation And Maintenance Manual, Page: 39 / 70

39
Extreme Duty Snow Blower Operation and Maintenance Manual
Maintenance
Service Schedule
Grease Points
IMPORTANT
Fluid such as hydraulic fluid, coolants,
grease, etc. must be disposed of in an
environmentally
safe manner. Some
regulations require that certain spills and
leaks on the ground must be cleaned in a
specific manner. See local, state and federal
regulations for the correct disposal.
WARNING
AVOID SERIOUS INJURY OR DEATH
• Always turn off and lockout power before
servicing the snow blower.
Figure 9
Grease the auger bearing (Item 1)
[Figure 9]
every
10 hours of operation
.
Figure 10
Grease the deflector hinge fittings (Item 1)
[Figure
10]
every 10 hours
.
Every 40 Hours:
• Check the chute rotate gear for correct
alignment and wear or damage.
• Check the hydraulic hoses - routing and
abrasion.
• Check the control harnesses - routing and
abrasion.
IMPORTANT
Inspect all hydraulic hoses and wiring for
wear and abrasion. Make sure hoses and
wiring is secured and does not pinch or rub
on sharp edges of the snow blower frame.
1
1
1