Blue Diamond Drum Mulcher, Operation And Maintenance Manual, Page: 23 / 90

21
Drum Mulcher Operation and Maintenance Manual
Operation
Weekly Inspection
WARNING
AVOID SERIOUS INJURY OR DEATH
Before servicing the attachment:
• Always park on a flat level surface.
• Lower lift arms and place attachment flat
on the ground.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Wait for all moving parts to stop.
• Stop the engine and remove the key.
SEE MACHINE’S OPERATOR’S MANUAL
FOR ADDITIONAL INFORMATION.
NOTE: In addition to the daily inspection tasks,
perform the following maintenance tasks
weekly or after 40 hours of operation.
Perform inspections at the end the work
shift while the machine is hot.
Check the following items every 40 hours of
operation:
• Lubricate the grease zerk labeled “40 hour” on
the overhung load adapter bearing located on
the right side of the mulcher. See “Lubrication”
on page 34.
• Inspect the grease overflow port for signs of
liquid overflow. Liquid grease streaks may be a
sign of bearing overheating or the operating
temperature of the grease used is too low.
• Clean debris from the compartment and drive
components.
• Inspect condition of drive belt cogs for wear
and damage.
NOTE: No play should be observed between the
sprockets and respective shafts.
• Verify belt tension.
• Check for damaged or missing decals.
Replace if necessary.