![Blue Diamond 159010 Operation And Maintenance Manual Download Page 22](http://html1.mh-extra.com/html/blue-diamond/159010/159010_operation-and-maintenance-manual_2775599022.webp)
22
5.1 LIFTING EYE
Note:
Lifting device must move freely within the lifting eye. When lifting device (sling chains) are
hinged or unhinged; no pinching, shearing or joint spots must occur during handling.
Inspect the following before each initial operation, at regular intervals, after assembly and after
special incidents:
•
Material worn to wear indicators (if equipped).
•
Lifting point completely intact
•
Deformation at load bearing components such as base body
•
Mechanical damage, like strong notches, especially in areas where tensile stress occurs
•
Reduction of cross-section due to wear >10 %
•
Corrosion (Pitting)
•
Cracks
•
Cracks or other damage at weld seam
•
Avoid damage from sharp edges on lifting devices.
Note:
Some
grinder
lifting eyes may not have wear indicators. Check for obvious wear and
thickness reduction of lifting eye.
Acceptable Wear
Replace Lifting Eye
Wear Indicator
Wear Indicator
Worn to Indicator
Worn to Indicator
Blue Diamond Attachments®
22
Summary of Contents for 159010
