Blue Coat SG810 series, Installation Manual

Page: 74 / 110

P/N 231-02941 SG810 Installation Guide page 74
The Disk Drive LED Has A Solid Amber Light
If the disk drive LED is glowing amber, the disk drive is not well-seated. To reseat
the disk drive see
“Installing a New Disk Drive” on page 66.
When the disk drive is properly seated, the disk drive LED glows solid green.
The SG810 Does Not Power On
If the SG810 does not power up, check the following:
• The power cord is fully inserted into the back of the SG810.
• The power cord is plugged into a working outlet or power supply.
When the SG810 is powered up and running, the Power LED on the front panel of
the SG810 is on, the Disk Drive LEDs (for as many disks as are installed) are on,
and the LCD displays Blue Coat when starting up and then the LCD cycles
between CPU utilization and proxied traffic statistics when the SG810 is running.
Figure 5-1: SG810 Powering Up
LCD
Power LED