36
Blue Coat SG200 Series
•
If the SG200 is unavailable (for example, it is not connected to the network properly or is already
configured), you either fail to connect to the Web page (and see a browser error page) or you see a
Blue Coat Web page that describes some of the potential problems you might have. Fix the
problem, if possible, and click
Configure Device
again. If you cannot fix the problem, contact the
remote administrator for assistance.
Note:
You might need to modify the network parameters on your PC so that the URL works to
configure the SG200. Consult the remote administrator if you suspect that this is required.
When you have set the basic networking parameters and connected the SG200 to the network, you are
ready to fully configure the appliance. For a list of all CLI commands, refer to the
Blue Coat ProxySG
Command Line Reference
. For information about configuring and administering the SG200 (including
information about setting policies that will explicitly grant or deny proxied transactions), refer to the
Blue
Coat ProxySG Configuration and Management Guide Suite
.
