SG9000 Tamper Evident Panel and Label Installation
6
Procedure: Installing the Louvered Shutters
The FIPS compliance louvered shutters are designed to prevent unauthorized access to
key system components by shielding the rear ventilation outlets. The kit includes one
large shutter, which covers the primary ventilation outlet and a smaller shutter, which
covers the secondary outlet. Both shutters are installed using the included flat-head
screws.
The image below shows the louvered shutters and security labels installed on a
SG9000:
To install the louvered shutters on an SG9000 series appliance:
Step 1:
Align the large louvered shutter mounting points against the screw locations
shown below and secure with three flat-head screws.
Step 1
Flat-Head Screw
x3
