En - 8
•
Connect the other end of the high pressure hose to the
spray gun by inserting the brass metal tip of the high
pressure hose into the fitting just ahead of the trigger
guard. It will lock into the spray gun with a “click” (Fig 5).
Confirm the hose is locked into the spray gun by pulling
slightly on the hose. The hose is now securely attached to
the spray gun.
•
To release the hose from the spray gun, press the blue
button on the underside of the gun toward the trigger
guard. The hose will slide out from the connection.
Spray Gun
•
To lock the trigger of the spray gun aim the gun away
from you and push the lock button from right to left, (Fig.
6), after doing so, squeeze or pull the trigger to make sure
it is locked and will not move. Get in the habit of leaving
the lock button in the “locked” position when the power
washer is not in use. This ensures the gun is in “safe”
mode until it is ready for use.
Lance and Detergent bottle
•
While the spray gun is in the locked position, insert
the turbo lance, the adjustable spray lance, or the
detergent bottle directly into the end of the spray gun
by inserting and pushing together and turning clockwise
simultaneously. To remove push together and turn counter
clockwise (Fig. 7). Push the safety lock button to lock
the trigger when changing lances or detergent bottle,
to ensure that they do not accidentally eject with force
during removal.
•
When using the turbo lance, make sure the turbo nozzle
is screwed on tight at the end of the lance, each time
you use it. The Turbo lance is designed for high impact
cleaning. Only use on hard surfaces such as driveways,
cement surfaces, patio bricks, etc. A test strip should be
done prior to avoid chance of damaging the surface.
•
When using the adjustable spray lance, the spray pat-
tern and intensity can be controlled according to power of
water needed for each task by twisting the spray nozzle
at the far end of the lance (Fig. 8). These can be used for
sweeping leaves or debris from flat surfaces or curbing.
This lance has the widest variety of applications as the
fan degree allows for good impact pressure
and
cleaning
coverage.
•
When using the detergent bottle, fill it with a properly
formulated detergent or cleaner with water ratio according
to instructions on the container (Fig. 9). The detergent
bottle comes with a straw which is fitted into the screw-on
top. If you don’t see the straw, look inside the bottle and
attach it to the screw-on top (Fig. 10).
Gun
Fig. 7
Fig. 9
Fig. 10
Fig. 8
Fig. 6
Fig. 5
Gun
Safety
Button
Trigger
