8
U
nPacking
& a
SSembLy
• After unpacking the BLUE CLEAN POWER WASHER, lay out parts and accessories. Familiarize
yourself with the parts in the package by comparing them to those listed on the “PACKAGE
CONTENTS” page.
• The BLUE CLEAN POWER WASHER requires some minor assembly. You’ll need a Phillips
screwdriver to install the high pressure hose hook and the nozzle tray.
NOTE:
Some parts may or may not be already assembled.
• Install the hose hook on the back of your BLUE CLEAN POWER WASHER
(Fig. 1)
handle. You’ll
notice where the hose hook meets the back of the unit. Place the screws in the holes provided on
the high pressure hose hook and screw them in. Do not use a power screwdriver. When the screw
is completely tight, give a small final clockwise twist of the screwdriver. Do not over tighten.
• Slide the spray gun holder onto the left side of the washer when facing it. This does not require
any screws.
(Fig. 2)
• Slip tab into slot and screw the nozzle tray on the bottom portion of the unit.
(Fig. 3)
When
placing the gun with the lance attached the nozzle will rest in this tray.
Fig. 1
Fig. 3
Fig. 2
