13
• First, remove the plastic shipping cover on the water inlet on the front of the power washer on the
right side. Attach the clear quick connect filter to the power washer
(Fig. 15)
hand tight is fine.
Slide the garden hose adapter collar onto the clear adapter
(Fig. 16)
, it will “click” into place.
• The water is now connected to your power washer. Turn on water.
• To remove the water hose, simply pull back on the blue collar and it will slide off the clear adapter.
Note: this can be done at any time. Water will not come out of the garden hose as the blue/
black collar has a water stop check valve. Water will only flow from the garden hose when it is
connected to the clear adapter.
• You have now completed the assembly of your
BLUE CLEAN POWER WASHER
and are now
ready to begin using your electric power washer. Read and observe all safety instructions.
o
Perating
i
nStrUctionS
*!Turn on the water supply at the faucet.!*
(Fig. 17)
Powering Up
• Make sure the “ON/OFF” switch is in the “OFF” position. The power switch has international
symbols for ‘on’ and ‘off’: On (|) Off (O),
(Fig. 18)
.
• Unwind the power cord completely and plug the GFCI into a grounded 120 volt outlet. Press the
‘
reset
’ button on the GFCI box
(Fig. 19)
. The indicator window should show a red color. This must
be done each time the unit is plugged in.
Fig. 17
Fig. 18
OFF/0
ON/I
OFF/0
ON/I
Fig. 15
Fig. 16
Summary of Contents for AR 117
Page 19: ...19 Notes...
