Blue Bird Sigma Y3FE 2015, Driver'S Handbook Manual

Page: 16 / 82

14
DRIVER HANDBOOK
Y3FE
Set the Clock
To set the clock, be sure the park brake is set then press and hold the bottom button
on the face of the instrument cluster for approximately 5 seconds. This will display
the Settings and Diagnostics screen. Press either the top or bottom button to move
to the highlighted bar to menu item 6 – Set Clock. Press both buttons simultane-
ously to select “hours” then use the upper and lower buttons to increase or decrease
the setting. Press both buttons simultaneously to set the hours. Repeat the process
for the “minutes” setting. A lapse of ten seconds or more of inactivity will return the
display to the previous screen automatically.
Dimmer Adjustment
Dimming or brightening the backlight in the instrument cluster can be accomplished
two ways. The first is when the bus is stationary with park brake set. The second is in
Drive Mode when the park brake is released and the headlight switch is in the “ON”
position. In either case the new setting will be stored in memory.
When the bus is stationary and the park brake is set, dimming the instrument
cluster is achieved through a menu in the drivers display in the cluster. Set the park
brake then press and hold the bottom button on the face of the instrument cluster
for approximately 5 seconds. This will display the Settings and Diagnostics screen.
Press either the top or bottom button to move the highlighted bar to menu item 4
– Dimmer. Press both buttons simultaneously to select “dimmer” then use the upper
and lower buttons to increase or decrease the backlight intensity. Press both buttons
simultaneously to set the dimmer and exit the menu. A lapse of ten seconds or more
of inactivity will return the display to the previous screen automatically.
If the bus is in drive mode by having the park brake released, the dimmer can be
adjusted by pressing either the top or bottom buttons to brighten or dim the instru-
ment cluster. The headlight switch must be in the “ON” position for this function to
operate.
Message Display Control Panel