Blue Bird Micro-Bird A1VC, Driver'S Handbook Manual

Page: 16 / 56

MICRO
BIRD
14
D R I v E R S h a N D b O O k
l
Seats and Seat Belts
Driver’s Seat Belt Operation
For driver’s seat belt operation, refer to chassis manual. If you failed to receive such a
manual, contact the chassis manufacturer’s closest dealership immediately to obtain
one.
Passenger Seat Belt Operation (If So Equipped)
Individual lap belts for passengers are retractable or non-retractable, depending on
option ordered. Insert the catch into the buckle, test for assurance of latch fit, and
pull loose end of strap until belt fits snugly across the lower hips. The buckle can
be released by pushing the button in its center. The adjustable end can be moved
outward on its strap by turning 90° to the strap and pulling.
Seat Belt Inspection And Maintenance
Inspect seat belts and their attachments on a weekly basis. Check seat belt buck-
les and adjustability to ensure proper operation. If necessary, lubricate buckle with
a graphite lubricant. When buckle is found to be inoperable, replace immediately.
If there are any defects in the webbing (i.e., torn or frayed), the seat belt must be
replaced immediately to ensure passenger safety. Hand-wash webbing with warm
water and mild soap. Rinse thoroughly and dry in the shade. Do not bleach or redye,
because such processing may severely weaken the assembly.
[WARNING] Be sure the lap belt is fitted snugly across the hips, and not the
waist. Failure to do so may increase the chance of injury in the event of a col-
lision.
[WARNING] If seat cushions are removed for maintenance, they must be in-
stalled using the following instructions. Failure to comply with these instruc-
tions could result in injury from unattached seat cushions in the event of an
accident.
Seat Cushion Removal And Installation—dot Seat
Removal
1. Loosen the two front swivel type clamps at the front underside of the
cushion with a Phillips-head screwdriver. Do not remove clamps.
2. Rotate the swivel clamps in order to clear the front retaining channel
frame.
3. Lift the forward edge of the cushion five to eight centimeters and pull
cushion forward to remove.