Blue Bird M380 2003, Owner'S Manual

Page: 80 / 579

2-2 – Instruments and Controls - Driver and Co-Pilots Area________________________________M380 Owner’s Manual
2-2-8 Rev. “F”
2-2.9.4.10 Operating Hours
The top line of the screen shows the screen title.
The second line shows the amount of time and percentage of
total time spent driving on this leg.
The third line shows the amount of time and percentage of
total time spent idling on this leg.
The last line shows the amount of time and percentage of total time spent idling with PTO engaged
on this leg.
2-2.9.4.11 Resetting Leg Data
To erase the leg data and start over, hold for 3 seconds
while viewing the leg data. Or, press and select “Reset
Leg” from the menu. Press to reset; press to leave this
screen and not reset leg.
2-2.9.5 Antitheft
Related sections: Keypad - Entry Screens, Units of Measure .
The antitheft feature deters vehicle theft by requiring the driver to enter a password, using the
RoadRelay 4 keypad, before allowing the engine to start. Antitheft will work with Cummins CELECT™
Plus (revision 4 software and later), ISB, ISC, ISL, ISM, ISX, and Signature 600 engines.
NOTE: The engine control module determines whether this feature is ON or OFF. ALL
Cummins engines leave the factory with Antitheft turned OFF. A customer desiring to use this
feature must visit a distributorship or certified dealership and request to have INSITE™
(Cummins authorized service tool) turn the feature to ON. (There may be a fee.) In addition,
while connected, it is VITAL that the customer choose their passwords (all numeric) and write
them to the ECM at this time. The factory default passwords are all 000000s and can not be
changed via the RoadRelay keypad initially. Once changed to some meaningful sequence, the
user can work with their selection of password(s) or change them via the RoadRelay keypad.
The above-described support for antitheft can also be accomplished with INSPEC™.
2-2.9.5.1 Selecting the Antitheft Mode
Antitheft modes affect how the engine is locked.
The four choices for the antitheft mode are:
•
Off The antitheft feature is OFF.
•
Manual The driver locks the engine by entering a password
•
Semiautomatic The driver locks the engine by selecting “Yes” when asked to “Arm Vehicle
Security” at key-off.
•
Automatic The engine is automatically locked after the ignition key is turned OFF.
Read the
How to Lock the Engine section for more details.