M380 Owner’s Manual____________________________________________Safety and Security - Security Features – 1-2
Rev. “F” 1-2-11
1-2.4 Crime Guard Security System
The following information explains how to operate your Crime Guard Security System. Use this
section if this is the system that was delivered with your motor home.
1-2.4.1 About your New Crime Guard System
Crime Guard systems combine the benefits of easy-to-use convenience with “no nonsense”
protection of person and property.
Please review this manual to become familiar with your Crime
Guard vehicle security system.
To operate your security system, the three principle components are
first described: the
The Remote Control Transmitter:
Your system comes with two pre-learned remote controls, or
“transmitters”, and is capable of being operated by as many as four transmitters. The transmitter has
three buttons: A large upper button, a small middle button, and a small lower button.
Every transmitter has its own unique, invisible electronic “code”. Each time the transmitter is used,
this code randomly changes, effectively protecting your system against “code grabber” devices, like
those used to copy cellular phone security codes. Another exclusive patented feature, Automatic
Transmitter Verification (ATV™), ensures that only your transmitters operate your system, and is
explained further under “Automatic Transmitter Verification” found later in this manual. These
features, and many others, ensure that Crime Guard systems are the most secure vehicle security
systems available.
That Status Indicator Light:
The Red Status Indicator Light reports the status of the security system
at all times, and also serves as a visual deterrent to break-ins and theft. In addition, the Status
Indicator Light is part of the ATV™ visual display, and is also used for the Alarm Memory Recall
feature. Specific description of the Status Indicator Light is found under section “Status Indicator
Light” later in this section.
The Valet Switch:
The Valet Switch has three main functions:
1. The Valet Switch can be used to turn off the security operation of the system, including the Last
Door Arming System feature (if used). This is referred to as “placing the system into
2. The Valet Switch can also be used, in conjunction with the vehicle’s ignition key, to perform an
emergency disarming of the security system in the event the transmitter is lost or becomes
inoperable. This is referred to as an “Emergency Override”.
3. The Valet Switch is used in the procedure of programming operational features and also for
encoding transmitters to the system.
1-2.4.2 Using Your Crime Guard System
Your new Crime Guard security system is designed to deter theft of both your vehicle and its content.
Arming the system turns on the protection operations, disables the vehicle’s starter and locks the
doors provided an interface is installed. Once the system is armed, any intrusion attempt will activate
it, sounding the siren and flashing the lights to attract attention. Disarming the system turns off the
protection, allowing normal use of the vehicle.
There are two methods of arming the security system:
1. The first method is to use the transmitter, by pressing and releasing its large upper button. The
system must not already be armed or be in
and the vehicle’s ignition switch
must be off. In normal operation, each press of the large upper button reverses the system
between the armed and disarmed states.
Summary of Contents for M380 2003
