Blue Aura Blue 1, Manual

Page: 12 / 18

12
Bluetooth
Bluetooth
Operating Instructions
Blue1 has a built-in Bluetooth receiver, this allows the Blue 1 to receive wireless Bluetooth audio from most smart phones/tablets and
laptops. Please select Bluetooth input, If a connection has not already been made or connection cannot be re-established, the Blue 1 will
automatically activate the “pairing mode”, BT will flash on the display. Now activate the Bluetooth mode on your source device.
The Blue1 will appear in the list of Bluetooth devices as Blue1. If it is not displayed in the list, set your source device to search for Bluetooth
devices manually and make sure that the Blue1 has been switched to the pairing mode.
Depending on the source device, you may be asked whether the password is to be accepted during the pairing procedure. You can confirm
this by simply pressing accept. If you are still asked for a password, use the default passwords „0000“ or „1234“. When the device has been
paired and connected successfully the „BT“ indicator will illuminate continuously.
Preset memory
The device is equipped with two independent PRESET memories for FM and DAB stations. Each memory can store up to 40 stations.
Storing stations:
Set the desired DAB or FM stations using the TUNING buttons on the unit or via the remote control.
• Select the desired storage location by holding down the corresponding key on the numeric keypad.
• In the case of two-digit storage location numbers (10 – 40), the +10 key first has to be pressed for a longer time and the desired digits then
entered.
• Successful storage is confirmed on the display with the appearance of STORED PRESET. In the first line, the storage location number is
played permanently before the station frequency.
Select a station from the list of stations:
Select the desired storage location via the numerical keyboard (by pressing briefly).
RDS (RADIO DATA SYSTEM)- function of the tuner(FM only)
RDS is a system which provides information about FM stations that is broadcast together with the station ‘s signal. The Blue1 can present
this information (about the station, broadcast, etc.) in the display.
The RDS information can be retrieved by repeatedly pressing the DISPLAY button (remote control) in the following order:
• PS (Program Service Name): Displays the name of the program.
• RT (Radio Text):Shows station information and messages.
• PTY (Program Type): Displays the type of program.
• Time/Date
If one of these functions is not supported despite reception of an RDS signal, "N/A“ will appear in the display.