1
N
OTE:
If you are unfamiliar or uncomfortable with completing this procedure, we
recommend consulting with a professional to perform the installation
.
Maintenance and Cleaning
Your turntable requires little of no regular maintenance. Remove dust with a slightly
damp antistatic cloth. Never use a dry cloth, this will create static electricity and
attract more dust! Antistatic cleaning agents are available at specialist stores, but
must be applied sparingly to avoid damage to rubber parts. It is recommended to
install the needle cover before cleaning or maintenance is carried out to avoid
damage.
NOTE:
If the turntable is not used over a long period of time, the drive belt should
be removed to prevent unequal stretching. Always disconnect the record player
from the power supply as a precaution before maintenance!
Potential Incorrect Use and Fault Conditions
This turntable is manufactured to the highest standards and undergoes strict quality
controls before leaving the factory. Faults that may possibly occur are not
necessarily due to material or production faults but can sometimes be caused by
incorrect use or unfortunate circumstances. Therefore the following list of common
fault symptoms is included.
The platter doesn’t turn although the unit is switched on:
- The unit is not connected to the main power supply.
- No power at the outlet.
- Drive belt is not installed or has slipped off.
No signal through one or other channel or both channels:
- Phone input not selected at amplifier.
- Amplifier not switched on.