S E R V I C E @ B L U D O T . C O M | 12
A S S E M B L Y N O T E S
Side Panel
1” lower than
case top
PT. 8036 x 4*
8041
An�-�p Bracket
PT. 8041 x 2
PT. 1218 x 4
Wall
Step 12
AT TAC H A N T I -T I P B R AC K E TS TO T H E WA LL .
Wall anchors and fasteners are included for installation into
drywall. Please consult your local hardware professional to
determine the hardware best suited for your wall type.
Position the anti-tip brackets onto the wall 1” below case top
panel height as shown and mark hole locations with a pencil.
If the mounting locations are not positioned on a stud, drill
5/16”
clearance holes in the hole locations. Press wall anchors into
drilled holes.
If the hole locations are positioned on a stud, this step of
installing wall anchors may be skipped. Instead, drill
7/64”
pilot
holes for the fasteners.
Secure anti-tip brackets in place using fasteners as shown.