FLOW Trouble Shooting Guide
(Model FLOW-18)
Note:
The FLOW is a GRAVITY dispense system.
Incoming water enters at the top of cold tank, fills and dispenses
out the bottom of cold tank.
(At cold tank being half full, it overflows down thru the intake
port and feeds the hot tank. Weight from above forces the hot
water out).
No power
1) Check wall outlet circuit is operating and circuit
breaker or GFI is not tripped.
2) Check power cord is solidly plugged into wall
and also connected to posts correctly on the ICB
board at back of FLOW.
Remove back cover to reveal the ICB board.
3) If connections are good, the ICB board may
need to be replaced.
No Hot water dispensing
