-27-
Display
Users can access this item to set wallpaper, screen saver, power on/off display, etc.
Call settings
Caller ID:
You can select the ID set by the network, hide the ID, or send the ID. By default, the ID set
by the network is chosen.
Note:
This function relates to the network. If you select Hide ID, dialing may fail.
Therefore, make sure that
calls can be normally dialed before you choose Hide ID.
Call waiting
: After you choose Activate, the mobile phone will contact the network. A moment later, the
network will make a response and send a message to acknowledge your operation. If the call waiting
function is activated, the network will alert you and the mobile phone screen will display the incoming
call number if others are calling you while you are already in a conversation.
Call diverts:
this network function enables you to forward incoming calls to another number you have
previously specified.
Call barring:
The call barring function enables you to bar calls as needed. When setting this function,
you need to use a network barring code, which can be obtained from the network operator. If the code is
wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to
select Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then
contact the network. A moment later, the network will make a response and send the operation results to
the mobile phone.
Line switching
: Switch to Line 1 or Line 2. By default, Line 1 is used.
Note: If you choose Line 2, dialing may fail. This depends on the implementation of the network operator.
Summary of Contents for DECO MINI Q131
Page 3: ... 3 6 Appendix 32 ...
