2017-09
1 866 907 0122 blubathworks.com
3
INSTALLATION STEP 2
• Position the O-rings (2) in its site on the nuts (1).
• Screw the nuts (1), as per drawing (A), on the threaded rods.
• Once the correct position of the rings is reached, tighten the nuts located under the wash
basin mixer to fix the threaded rods.
INSTALLATION STEP 2
•
Position the O-rings (2) in its site on the nuts (1).
•
Screw the nuts (1), as per drawing (A), on the threaded rods.
•
Once the correct position of the rings is reached, tighten the nuts
located under the wash basin mixer to fix the threaded rods.
•
(A)
INSTALLATION STEP 3
•
Place the three small cover plates (1).
•
Place the O-rings (2) and screw the cap (3) to secure the cover
plates.
