2020-06
1 866 907 0122 blubathworks.com
4
FINISHING
6. Position the lavatory squarely under the cutout and use a ‘C’ clamp to pressure and hold the basin securely to allow the adhesive to dry.
6
7. Install steel strapping or “L” brackets for extra support. Fig 6.
8. Wipe away excess sealant and fill any voids as necessary. Allow adhesive to set for 24 hours prior to use.
9. Connect the trap to the drain and complete faucet installation per manufacturer’s specifications.
10. Run water into lavatory and check entire installation for leaks.
For additional fixing for ONLY the following models: SA0107N37, SA0107N38, SA0209N37, SA0209N38, SA0305N37 & SA0305N38
You may use the provided fixing bag set, but it is required to drill your countertop.
MODEL
mm
inches
SA0107N37
310
12 "
SA0107N38
250
9⅞"
SA0209N37
310
12 "
SA0209N38
250
9⅞"
SA0305N37
510
20 "
SA0305N38
450
17¾"
Fixing hole
Fixing hole
