INSTRUKCJA OBSŁUGI
17
Cut off / Recover oil and power
Command
:
RELAY,1#
(cut off oil and power) Auto-Reply: relayer enable OK!
Command
:
RELAY,0#
(recover oil and power) Auto-Reply: relayer disable OK!
It only works when the speed less than 20km/h
Over-Speed Alert
Command
:
OS,80#
(80 is the set-up speed)
OS,OFF#
(turn off this function)
·this is to turn on/off the over-speed alarm,speed unit:km/h
·speed range:30-180km
·after sending the command,it will reply:OS OK!
Checking Settings
Command
:
#TCP#
The device will reply : IMEI NO./WEBSITE:PORT NO./APN##/NETWORK
STATUS/SIGNAL#POWER
Example
:353506810007721/www.b.gps903.net:7700/cmnet##/SOC4/165:30#100
Command
:
ST#
IMEI
：
888xxxxxxxxx888
ALM:1(Alarm mode)
VA
：
0 (Vibration alarm on/off)
OS: 0
（
Over speed alarm on/off
）
LA
：
0
（
Light perception alarm
on/off
）
HBT
：
10 (Heartbeat packet time)
LANG
：
1
（
language
）
GMT
：
E8 (time zone)
Command:
QP#
IMEI:8888888888XXXX8
APN:CMNET
IP:a.gps903.net/7700
LMT,0#
CENTER:
SOC4:1
GSM:30
GPS:SLEEP
BAT:4.2
Reboot device
Command
:
RESET#
·The device will restart itself without changing any settings.
Initialization
Command
:
RFS#
·This is to make all settings back to the factory default,except the IP.
·Only the center number has the right to operate.
·please caution to use.
