Now for a tricky bit. Make sure you are using a
flat, level surface and stand the platform on the
two leg pieces shown above. Note – at this point
the legs are pretty much vertical.
Apply a little glue to the points where the ‘Z’ piece
will meet the legs and then gently put it into
position. Repeat for the other ‘Z’ piece, then
carefully adjust the legs so that they are positioned
as shown above. Leave to dry.
Glue the roof supports to the back of one roof
piece as shown above.
Glue the other three roof pieces into position,
slotting them onto the lugs on the roof supports.
Finally prop the ladder in place and sit the roof on
top of the platform supports.
