28mm Privy #1
B28-OW-203
Please read these instructions fully before starting construction.
PVA or equivalent glue will be required to stick sections together.
Sand paper can be used to gently clean any joints.
A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and remember
to cut away from yourself at all times.
During the construction of this model, you may find it convenient to use pegs / elastic bands to hold pieces in place while
you allow glue to dry.
Remove the base and front of the seat from the sprue.
Glue together as shown above.
Take the back wall and seat upper.
Glue the seat upper to the
reverse
of the back wall.
Check the detailing is facing the right way (see pic).
Glue the back wall to the base.
Carefully insert the door handle into the space in the
door. Leave to dry.
Take the front wall from the sprue.
Glue it to the base as shown.
