Shed #2 (B20-ST-103)
Remove the two sides, base, front and rear of the shed
from the sprue.
Glue the sides and rear to the base.
Glue the front into position.
Take the pieces of the roof.
Glue the supports to the back of one roof section.
Then glue the other roof section into place.
Place or glue the roof onto the body of the shed.
Shed #3 (B20-ST-104)
Remove the two sides, base, front and rear of the shed
from the sprue.
Glue the sides and rear to the base. The higher point
of the end should be against the side with the
window in it.
