Place the top support on top of the door and
gently slide this into position as shown.
Then take the insert sections from the sprue and
glue them into the spaces in the framework.
Note the insert pieces for each wall are in their
relative positions on the sprue.
The completed Saddlery layer.
Painting
It is much easier to paint sections of this building prior to assembly.
For the inner walls we removed these from the sprue and then sprayed them white with a standard car undercoat spray
paint.
Once dry we then painted over the etched woodwork with a pale brown colour.
The outer frames remained unpainted.
The outer insert pieces were sprayed white (like the inner walls)
