The roof is formed from the two large pieces and
four beams (see above).
Turn the main roof piece over and glue the beams into
place using the holes/lugs provided.
Once you’re happy that the glue has set
sufficiently, turn the roof over and glue the side
piece into place as shown. Leave to dry fully.
The lift is formed from the pieces shown above.
Glue the pieces
together as shown,
with the square
holes in the side
pieces nearest to
the back piece (i.e
the one with the
slot).
Slot the platform section on top of the support pillars
(glueing them in place if you so wish). Push the lift into
position, aligning the ends of the central stanchion
into the slot on the lift.
Add the two roof supports (note the direction of
the slots on the top of the support) into the holes
provided.
The railings are added to the edges of the platform
and will slot into the holes provided.
