10mm 2x2 Residential
B10-MW-107
Please read these instructions fully before starting construction.
PVA or equivalent glue will be required to stick sections together.
Sand paper can be used to gently clean any joints.
A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due
care and remember to cut away from yourself at all times.
During the construction of this model, you may find it convenient to use pegs / elastic bands to hold
pieces in place while you allow glue to dry.
2x2 Residential (B10-MW-107)
Remove all the four walls, the roof and all four
corner bracers from the sprue.
Glue the roof to one wall section, along with 2 corner
bracers.
Work round the building, adding each wall in
turn, along with a corner bracer.
Finally add the columns into position.
