Attach two supports as shown
–
the etched line on
them should be facing away from you (towards the top
of the model).
Turn the model over and attach the other two
supports.
Take these four roof pieces.
Glue them together (see pic).
Take two of the inner skin pieces.
Attach them to the model as shown, with their etched
lines facing outwards.
Take the three roof components.
Then glue them into place.
Add the other inner skin side section.
Glue the base to the model.
Glue the windows strip into place with the widest
blank at the bottom. The strip will touch the base
and have a small gap at the top.
