ADR | Oberer Buxheimer Weg 60, D-87700 Memmingen P | +49 8331-756 965 80 E | [email protected]
blossom-ic GmbH & Co. KG | Intelligent Controls
4
Press the „Register“ button on
the Circulation Pump Controller
for 3 seconds
4.
LED on controller starts flashing,
controller registers
5.
LED on the controller lights up
continuously => The registration
was successful
6.
Note:
If the LED on the Circulation Pump Controller goes off => The registration has failed
(Please repeat previous steps)
Connection diagram
Contact
Sensor
Circulation
pump
