Installation
Detach the water supply hose on the part of
the shut off valve, then install the T-valve.
In case of a rigid pipe, T-valve cannot
be installed.
Needs to purchase and install the
separate flexible hose(for water tank).
Caution before installation
Check whether the size and shape of the toilet seat are suitable for installation.
A ground connection should be done by authorized service personnel only.
Do not connect the power until installation is finalized.
Check all the accessory parts are in place.
Remove the existing toilet seat.
Remove the existing toilet seat and lid by
unfastening fastening nuts underneath.
Keep the detached seat,
lid and nuts for later use.
Drain toilet water tank completely after turning off the water supply
by turning the shut off valve clockwise.
Rubber
grommets
Washers
Fastening
nuts
1.
2.
3.
Water
Supply
pipe
Water
Supply
pipe
Shut off Valve
Flush
Drain
T-valve
12
