3. Headphone Max Levels:
When changing
modes, always turn down the headphone
gain first! Please don’t hurt yourself.
Normal Setting:
This is the default and is
used for typical low-impedance
headphones.
Start with this setting…it still
gets plenty loud!
Loud AF setting:
Loud AF = Loud As
Fxck. So take extreme caution when
changing to this setting, as you could
damage your hearing or perhaps your
headphones. Always start with the
headphone gain down, then switch it.
Bring it up easy!
Use LAF only for
high-impedance headphones, for instance
the Beyerdynamic DT-990 (600 ohms).
One last Public Service Announcement
(again I’m so sorry)
- Before changing to
a different pair of headphones, or
changing headphone settings on the back
of the module,
always
first turn down the
headphone gain! As an example,
changing from high impedance
headphones to low impedance
headphones without first turning the gain
down could very well be damaging to your
ears (due to higher power being dumped
into your lower impedance headphones).
Blood Cells Audio will not be
responsible for ruined pants and/or
ears.
4.
Power:
Yes.
©2022 Blood Cells Audio LLC
v1
9
