STEP 4 - TS Configuration
STEP 5 - Configure IP Output*
Go to the Main > Output > TS Config Tab
Verify the Multiplexed MPTS Output default
settings are suitable for your application
- TS bitrate = QAM Modulator
- Modulation Mode = QAM 256
- Out of band = disabled
Verify the Output Mapping Section.
- Input for each TS must be different.
- Every PID and Program Number must be
different.
- Short Name should be a descriptive
name of the program, as it will be shown
on the television (max 7 alphanumeric
characters)
- Major and Minor Channel numbers are
what the TV will display as the channel.
Click “SAVE” at the bottom to apply changes.
1
2
3
Go to the Main > Output > IP Tab
Assign the Destination IP, Encapsulation protocol, Destination and Source Ports for each
transport stream.
Verify the Stuffing is set to “Disabled” and the Output is “Enabled”
Click “SAVE” to apply the settings.
1
2
3
NOTE: The IP Output Tab is only available on the HDE-8C-QAM/IP DIN model.
3
1
2
1
2
3