31
HDE-2H/2S-QAM
Instruction Manual
The following parameters can be modified:
Login: is the Administrator’s login (10 characters maximum). This login allows the user to make changes to any area of the
unit. The factory default Login is “Admin”. Login is case sensitive.
Current Password: is the Administrator’s Current Password (10 characters maximum). The factory default password is
“pass”. Password is case sensitive and will not be displayed.
New Password: used only if the user wants to change the current Administrator’s password. Must enter a new password
(10 characters maximum). Password is case sensitive and will not be displayed.
Confirm New Password: must enter the same password as entered in above. If password entered in &
does not match, an error will be displayed.
Guest Login: is the Guest login (10 characters maximum). This login allows the user to view the unit settings but does not
allow any changes. The factory default Guest Login is “Guest”. Login is case sensitive.
Current Guest Password: is the Current Guest Password (10 characters maximum). The factory default Guest password is
“pass”. Password is case sensitive and will not be displayed.
New Guest Password: used only if the user wants to change the current Guest password. Must enter a new password (10
characters maximum). Password is case sensitive and will not be displayed.
Confirm Guest Password: must enter the same password as entered in above. If password entered in & does
not match, an error will be displayed.
Save Configuration Settings: allows the user to download and save the existing configuration of the unit in a .dat file format.
Choose File: allows the user to select the desired Config file from any location on the computer to be uploaded to the unit.
Load & Apply Configuration Settings: allows the user to upload a newly created file or update an existing file.
System watchdog: when Enabled, automatically reboots the unit if, the Operating System stops working or the Status LED
turns stable green or Off. When Disabled, manual reboot is required in case of above events.
System Reboot: allows the user to reboot HDE-2H/2S-QAM.
10/100 IP Address: is the static IP address that is assigned to the unit. It allows the user to access the unit via the web
interface. The factory default IP address is 172.16.70.1.
10/100 Subnet Mask: is the Subnet Mask address of the unit. It allows the user to access the unit from another network
via the web interface. The factory default Subnet Mask is 255.255.255.0.
10/100 Default Gateway: is the gateway address of unit. It allows the user to access the unit from another network via the
web interface. The factory default Subnet Mask is 172.16.70.254.
1 GIGE IP Address: is the static IP address assigned to the Gigabit Ethernet (GigE) port. The factory default value is
192.168.253.1.
1 GIGE Subnet Mask: is the Subnet Mask address assigned to the Gigabit Ethernet (GigE) port. It allows the user to
determine which subnet the GigE IP address belongs to. The factory default Subnet Mask is 255.255.255.0.
1 GIGE Default Gateway: is the gateway address assigned to the Gigabit Ethernet (GigE) port. It allows the user to access
the IP output of the unit from another network. The factory default Subnet Mask is 192.168.253.254.
3
3
4
7
7
8
17
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Make sure the IP address assigned to 10/100 IP Address and 1 GigE IP Address (see & above) are in
different network address ranges or sub-networks.
Example: If the 10/100 IP Address = 172.16.70.100,
10/100 Subnet Mask = 255.255.255.0, and
1 GigE IP Address = 172.16.70.110,
then you will not be able to communicate with the unit as the Remote Control 10/100 and Data Out
(1 GigE)
ports (see & of Section 2.2 for details) belong to the same subnet.
Therefore, assign 1 GigE IP Address = 192.168.253.1 or 172.16.100.98 to ensure that the Remote Control 10/100 and
Data Out
(1 GigE)
ports belong to different address ranges
(when using 192.168.253.1)
or subnets
(when using 172.16.100.98)
.
14
17
1
2
18
19