24
SAT FINDER
______________________________________________________________
Satellite locked.
Touch the selected transponder, touch YES/
NO to add or delete from the list. Once finished,
touch “SAVE & EXIT”.
Touch “PARAM” to modify the transponders list.
Satellite locked.
The SAT FINDER function allows you to check the quality of 4 transponders simultaneously
and to check the operation of the 4 LNB polarities.
When the chosen satellite is found the buzzer will start. If this does not happen, continue looking for the
right satellite. Optimize the dish alignment and skew to obtain the maximum NsMAR value (noise margin).
NOTE:
For a proper use of the “SAT FINDER” function, verify the tuning parameters for all three
transponders (frequency, polarity, band, and symbol rate) and the type of lnb you are using (universal
or quatro)
Go to the www.lyngsat.com site for more information
Press the “HOME” key.
Touch “SAT” and then “SAT FINDER”
or use the wheel.
