21
HDIP
Instruction Manual
SFP Video Network Settings:
Mac Address:
read-only field that indicates the MAC Address of the “SFP Output” Port.
DHCP Enable:
Enables or Disables DHCP on the SFP Output.
IP address:
the static IP address that is assigned to the SFP Network Output. (Default: 172.16.80.1)
Subnet Mask:
the subnet mask address of the SFP Network Output.
Default Gateway:
The Gateway Address of the SFP Network Output.
HTTP Server Enable:
“Enabled”: This allows management capability on the same SFP port (SFP port IP Address)
as the streaming video.
Link Speed (copper only):
Default setting is "Auto".
Other options are shown to the right.
VLAN Enable:
Enables or Disables VLAN.
VLAN Tag:
allows the user to set the defined VLAN
Tag for the unit.
SFP Control-Only VLAN Settings:
Enables or disables
VLAN Settings for Control-Only.
Control Port Ethernet Settings:
are defined here for the control port.
MAC Address:
read-only field that indicates the MAC Address of the “Control 100/1000” Port.
IP Address:
the static IP address that is assigned to the unit, allowing the user to access it via the web interface.
Subnet Mask:
the Subnet Mask address of the unit, allowing the user to access it from another network via the
web interface.
Default Gateway:
the gateway address of unit, allowing the user to access it from another network via the web
interface.
DNS Settings:
DNS Mode:
Options are
DHCP Provided
or
Manual
mode. When in
manual
mode, enter Primary, Secondary name
servers and/or Search Domains in the space provided.
Nameserver:
Read-only field that indicates conversion from domain names to IP addresses.
5.6 "System > Networking" Screen (continued)
2
3
4
1
1a
Link Speed Options
In the first section, the Network Configuration Mode can be set to either advanced or simple mode. The differences
between these modes are as follows:
•
Advanced Mode:
enables the SFP output port and associated settings.
•
Simple Mode:
allows streaming out the front-panel control port and disables the SFP port.