Blomberg WMT 7310, User Manual

Page: 49 / 64

EN
49
• Delicate
You can wash your delicate clothes on
this Programme. It has more sensitive
washing movements and does not
make intermediate spinning compared
to “Synthetic” Programme. It must be
used for clothes for which sensitive
washing is recommended.
• Hand wash&Silk
You can wash your woolen/delicate
clothes that bear “not machine-
washable” labels for which hand wash
is recommended on this Programme.
It washes the laundry with very tender
washing movements without damaging
your clothes.
•Refresh
This Programme is used to quickly wash
(30 minutes) a small amount of lightly
soiled cotton garments.
• Super
This Programme washes for a
longer period at 40°C and gives the
same result as the "Cottons 60°C"
Programme, thus it saves energy. It is
suitable for clothes for which you cannot
use the "Cottons 60°C" Programme.
• Shirts
You can use this Programme to wash
cottons and synthetics together. There
is no need to sort them.
• Sports
This Programme is suitable for clothes
that are normally worn for a short time
such as sportswear. It is used to quickly
wash a small amount of cotton/synthetic
blended clothes.
• Jean
Use this programme to wash your
cotton and synthetic clothes together
without sorting them.
Special Programmes
For specific applications, you can select
any of the following Programmes:
•Rinse
This Programme is used when you want
to rinse or starch separately.
• Spin + Drain
This Programme is used to apply an
additional spin cycle for the laundry or to
drain the water in the machine.
Before starting this Programme, select
the desired spin sped and press "Start/
Pause/Cancel" button. Your machine
drains the water after spinning at the set
spin speed.
If you only want to drain the water
without spinning your laundry, select
“Spin and Pump” Programme, and then
select no spin function with spin speed
selection button. Press “Start/Pause/
Cancel” button.
A
You should use a lower spin speed
for delicate laundries.
Spin speed selection
Whenever a new Programme is
selected, the maximum spin speed of
the selected Programme is displayed on
the spin speed indicator.
To decrease the spin speed, press the
“Spin” button. Spin speed decreases
gradually. Then, rinse hold and no spin
options are shown respectively.
Rinse hold is shown with “ ” and no
spin is shown with “ ” symbols.
If you do not want to unload your
clothes immediately after Programme,
you may use rinse hold function in
order to prevent your clothes become
wrinkled in anhydrous conditions. With
this function, your laundry is kept in the
final rinsing water. If you want to spin
your laundry that you left in water:
- Adjust the spin speed.
- Press “Start/Pause/Cancel” button.
Programme resumes. Your machines
drains the water and spins your laundry.
You can use no spin function in order to
drain the water without spinning at the
end of the Programme.