16 / 48 EN
Washing Machine / User’s Manual
If the water
level in the machine is not suitable when you
press Start / Pause button, the display will show that the
loading door is locked.
Switching the machine to pause mode:
Press the Start / Pause
button to switch the machine to
pause mode. The frame around the
Start / Pause
button
starts flashing. "Stand-by" appears on the display.
Stand-by
Changing the programme selection after programme
has started:
The programme change is not allowed when the current
programme is running.
If you turn the
Programme Selection
knob while the
programme is running, "To Make Changes Switch to
Standby" appears on the display.
You can select the new programme after switching the
current programme to standby.
C
The selected program starts anew.
Changing the auxiliary function, speed and
temperature
Depending on the step the programme has reached, you
can cancel or activate the auxiliary functions; see, "Auxiliary
function selection".
You can also change the speed and temperature settings;
see, "Spin speed selection" and "Temperature selection".
C
The loading door will not open if the water temperature
in the machine is high or the water level is above the
door opening.
4.18 Child Lock
Use Child Lock function to prevent children from tampering
with the machine. Thus you can avoid any changes in a
running programme.
C
You can switch on and off the machine with
On / Off
button when the Child Lock is active. When you switch
on the machine again, programme will resume from
where it has stopped.
C
If you press any button when the Child Lock is
activated, the machine will give an audio warning.
After pressing the buttons for 5 times consecutively,
audio warning will not be given but the warning on the
display will remain active.
To activate the Child Lock:
Press and hold 2
nd
and 4
th
Auxiliary Function
buttons
for 3 seconds. After the countdown as "Child Lock 3-2-1"
on the display is over, "Child Lock Enabled" appears on
the display. You can release 2nd and 4th Auxiliary Function
buttons when this warning is displayed.
Child Lock
Enabled
C
"Child Lock Enabled" appears on the display if you press
any button when Child Lock is enabled.
To deactivate the Child Lock:
Press and hold 2
nd
and 4
th
Auxiliary Function buttons for 3
seconds. After the countdown as "Child Lock 3-2-1" on the
display is over, "Child Lock Disabled" appears on the display.
Child Lock
Disabled
4.19 Cancelling the programme
The programme is cancelled when the machine is turned off
and on again. Press and hold
On / Off
button for 3 seconds.
After the countdown as "Cancel 3-2-1" on the display is
over, the machine turns off.
C
If you press
On / Off
button when the Child Lock is
enabled, the programme will not be cancelled. You
should cancel the Child Lock first. Countdown as
"Standby 3-2-1" appears on the display.
C
If you want to open the loading door after you have
cancelled the programme but it is not possible to open
the loading door since the water level in the machine
is above the loading door opening, then turn the
Programme Selection
knob to
Pump+Spin
programme and discharge the water in the machine.
4.20 End of programme
“Laundry can be taken out” appears on the display when the
programme is completed.
If you do not press any button for 2 minutes, the machine
will switch to standby mode. Display and all indicators are
turned off. Only the frame of the
Programme Selection
knob remains flashing.
If you press any button or turn the
Programme Selection
knob when the machine is in standby mode, programme
steps that are completed will appear on the display.
4.21 Memory (Favourite) program setting
You can create a favourite programme by saving frequently
used programme and other settings. Use this function when
you want to select quickly the same settings you use for the
laundry that you wash regularly.
Favourite programme will remain at the factory set
programme until you make a new favourite programme
setting.
To store a new favourite programme: