background image

20    

EN

Turning the washer on

Plug in your washer. Turn the tap on 

completely. Check if the hoses are 

connected tightly. Place the laundry in 

the washer. Add detergent and softener. 

Press the “On/Off” button.

Program cycle selection

Select the appropriate program from 

the program table according to type, 

amount and degree of soiling of the 

laundry and washing temperatures.

Turn the Program Selection Knob to the 

program mode that you wish to wash 

your laundry.

The recommended temperature and 

spin speed for the selected program 

appear. Press “Start/Pause/Cancel” 

button to start the program.

Wash Cycles

Depending on the type of fabric, the 

following main programs are available. 

Each of these main programs comprise 

of a complete washing process, 

including washing, rinsing and, if 

required, spin cycles.

A

 When selecting the program you are 

going to use, always consider type 

of fabric, color, degree of soiling and 

permissible water temperature.

A

 Always select the lowest required 

temperature. Higher temperature 

means higher power consumption.

C

 For further program details, see  

“Program Cycle Selection Table”

•Regular/Cotton

You can wash your durable white 

and colorfast items with this cycle. 

Washes with vigorous tumbling 

movements in a longer washing 

cycle. It is recommended for your 

cotton or linen items (such as bed 

sheets, pillowcases,jeans,towels, 

bathrobes,garments, T-shirts,sweat-

shirts , etc.). You can select wash 

temperature according to the soiling 

level and/or care label of items. Sanitary 

should be chosen for items that need 

extra hygiene such as baby clothes, 

kitchen towels and garments.

•Sanitary

You can wash your durable white and 

colorfast items with this cycle. Washes 

with vigorous tumbling movements 

in a longer washing cycle. It is 

recommended for your cotton or linen 

items that need extra hygiene such 

as baby clothes, kitchen towels and 

garments.

• Permanent Press

You can wash your easy care items on 

this cycle. Washes with gentler tumbling 

movementsand in shorter washing 

cycles. It is recommended for your 

cotton,synthetic or blended items (such 

as shirts, pants, wrinkle-free items, 

etc.). You can select wash temperature 

according to the soiling level and/or care 

label of items.

•Delicates

You can wash your delicate easy-

care and wrinkle-free items on this 

program. It has more sensitive 

tumbling movements and does not 

do intermediate spinning compared 

to the permanent program. It must be 

used for cotton, synthetic or blended 

clothes for which sensitive washing is 

recommended.

•Wools

You can wash your machine-washable 

wool items on this program. It is 

recommended to use appropriate 

detergents and laundry additives for 

wools.

Additional programs 

For special cases, there are also extra 

programs available:

C

 Additional programs may differ 

according to the model of your 

washer.

• Babycare

Increased hygiene is provided by a 

longer heating period and an additional 

Summary of Contents for WM 87120 NBL00













































Reviews: