G
40
To activate the Child-proof lock:
• Press both buttons shown above at
the same time and hold for approx. 2
seconds until the >Child-proof lock<
17a
indicator lamp starts glowing.
To deactivate the Child-proof lock:
• Press the same two buttons at the
same time and hold for approx. 2 sec-
onds until the >Child-proof lock<
17a
indicator lamp goes off.
Spin speed selector
3
The appropriate maximum spin speed
is
automatically
set in each pro-
gramme.
The current value is indicated by the
lights
12a
.
You should reduce the speed for especially
delicate fabrics.
• By repeatedly pressing the >Spin<
21
button you can change the speed– or
completely disable the spin cycle.
• In the >No spin<
12c
setting no spin-
ning takes place; water is only drained.
• In the >Rinse hold<
12b
setting the
programme stops after the last rinse
cycle. The laundry remains in the wa-
ter (to protect against creasing). A
blinking display notifies you that the
rinse stop has been reached. For steps
after this, refer "Quick instructions for
daily use".
3
The higher the spin speed, the lower
the residual moisture.
If you wish to dry your laundry subse-
quently in a dryer, select the maxi-
mum possible speed – this saves ener-
gy when drying.
Display
The display
16
shows the time remaining
for the programme to complete. The time
for hours and minutes is displayed as
"hh:mm". For example, a time of 10 hours
is shown on the display as "10:00" and 1
minute as " : 1".
3
The length of a programm depends
on the type of program and the addi-
tional functions selected. The details in
the table "Technical data and con-
sumption figures" refer to programms
without additional functions.
12a
12b
12c
21
16
