Blomberg TKF 8451 Manual Download Page 31

Page: 31 / 36

31 EN

Drum lighting does not turn on. (On models with lamp)
• Dryer is not switched on with the On / Off button. >>>

Make sure that the dryer is

switched on.

• Lamp is defective. >>>

Call Authorizse Service Agent to have the lamp replaced.

End/Anti-creasing symbol is on.
• Anti-creasing programme is activated in order to prevent laundry that has

remained in the machine from creasing. >>>

Turn off the dryer and take out the

laundry.

End symbol is on.
• Programme is over. Turn off the dryer and take out the laundry.
Lint Filter Cleaning symbol is on.
• Lint filter is not cleaned. >>>

Clean the lint filter.

Lint Filter Cleaning symbol is flashing.
• Filter housing is clogged with lints. >>>

Clean the lint filter housing.

• A deposit has built up on the lint filter pores that may cause clogging. >>>

Wash

the lint filter with warm water.

• Filter drawer is clogged. >>>

Clean the sponge and the filter cloth in the filter

drawer.

Water leaks from the loading door
• Lint has accumulated on the inner surfaces of the loading door and on the

surfaces of the loading door gasket. >>>

Clean the inner surfaces of the loading

door and the surfaces of the loading door gasket.

Loading door opens spontaneously.
• Loading door is ajar. >>>

Push the loading door to close until you hear a locking

sound.

Water Tank warning symbol is on/flashing.
• Water tank is full. >>>

Drain the water tank.

• Water draining hose is bent. >>> If the product is connected directly to a

wastewater drain, check the water drain hose.

Filter Drawer Cleaning warning symbol is flashing.
• Filter drawer is not cleaned. >>>

Clean the sponge and the filter cloth in the filter

drawer.

If you cannot eliminate the problem although you follow the instructions in this

section, consult your dealer or the Authorise Service Agent. Never try to repair a
nonfunctional product yourself.

Summary of Contents for TKF 8451





































Search results

Summary of Contents for TKF 8451

Reviews:

Related manuals for TKF 8451

Brands by name

Popular brands

Blomberg TKF 8451, Manual

Search results

Summary of Contents for TKF 8451

Reviews:

Related manuals for TKF 8451

Brands by name

Popular brands