![background image](http://html1.mh-extra.com/html/blomberg/tkf-8431/tkf-8431_user-manual_2773986027.webp)
Dryer / User Manual
27 / 32 EN
M
aintenance and cleaning
7.2 Cleaning the sensor
There are dampness sensors in the dryer that detect
whether the laundry is dry or not.
To clean the sensors:
• Open the loading doorof the dryer.
• Allow the machine to cool down if it is still hot due to
the drying process.
• Wipe the metal surfaces of the sensor with a soft
cloth, dampened with vinegar and dry them.
C
Clean metal surfaces of the sensors 4
times a year.
C
Do not use metal tools when cleaning
metal surfaces of the sensors.
A
Never use solvents, cleaning agents or
similar substances for cleaning due to the
risk of fire and explosion!
7.3 Draining the water tank
Dampness of the laundry is removed and condensed
during drying process and the water that arise
accumulates in the water tank. Drain the water tank after
each drying cycle.
A
Condensed water is not drinkable!
A
Never remove the water tank when the
program is running!
If you forget to drain the water tank, the machine will
stop during the subsequent drying cycles when the water
tank is full and the Water Tank warning symbol will flash.
If this is the case, drain the water tank and press
Start /
Pause
button to resume the drying cycle.
To drain the water tank:
• Pull the drawer and remove the water tank carefully.
• Drain the water in the tank.
• If there is lint accumulation in the funnel of the water
tank, clean it under running water.
• Place the water tank into its seat.
C
If the direct water draining is used as
an option, there is no need to empty the
water tank.
Summary of Contents for TKF 8431
Page 1: ...Dryer TKF 8431 User manual...