background image

EN

1

1

Control Panel 

5

  

Operating the product

1

2

3

4

Use the 

Q

uick cooling

 

function 

when you want

 

to quickly cool the 

food

 

placed in the fridge. If you 

want

 

to cool large amounts of

 

fresh 

food, activate this

 

function before 

putting

 

the food into the product

.

If you do not cancel it, Quick cooling 

will cancel itself automatically after 

1

 

hour at the most or when the fridge 

reaches the required temperature. 

This function is not recalled when 

power restores after a power failure.

1.

On

 

/

 

Off Indicator

Press the On

 

/

 

Off button for 3 seconds

to turn off or turn on the fridge. 

When

the fridge is off,

 the

 symbol

 

(  ) 

is lit.

 

All

the other symbols are turned

 

off.

2.

Fridge temperature

 

setting

 

button

Press this button (  ) to set the

temperature of the fridge to 8, 7, 6, 5,

4, 3, 2, 8... respectively. Press this

button to set the fridge temperature to

the desired

 

value.

3.

Quick fridge function

The button 

(    ) 

has two functions. To

activate or deactivate the 

Q

uick cool

function, press it briefly. Quick Cool

indicator will turn off and the product

return to its normal settings.

4

. Alarm 

 

O

ff 

When the fridge door is opened for 

1

minute a sound alarm turns on. Alarm

can be turned off by pressing "Alarm

Off" (   ) button. If you

 

close the door

and then open again

,

 

"Door open

alarm" will be activated

 

again after 

1

minute later.

 In case of sensor failure,

the warning icon will lit (   ). If the

button „Alarm off” is pressed, the

warning will be 

"

cleaned

"

.

5

.

Vacation Function

In order to activate vacation

 

function,

press this button ( 

 

   ) for 3 seconds,

 

and

the vacation mode indicator (    )

 

will be

activated. When the vacation

 

function is

activated, “- -” is displayed

 

on the fridge

temperature indicator

 

and no active

cooling is performed in

 

the fridge. It is not

suitable to keep the

 

food in the fridge

 

in

this function.

 

To cancel this function press

Vacation

 

function button again.

Defrosting

The appliance defrosts automatically. 

The defrosting water runs to the drain tube 

via a collection container at the back of the 

appliance (1) (see diagram). During 

defrosting water droplets may form at the 

back of the fridge where concealed 

evaporator is located. Some droplets may 

remain on the liner and refreeze when 

defrosting is completed. Do not use 

pointed or sharp edged objects such as 

knives, forks to remove the droplets which 

have frozen. If at any time the defrost 

water does not drain from the collection 

channel, check to ensure that no food 

particles have blocked the drain tube. The 

drain tube can be cleared by pushing the 

special plastic plunger provided down the 

drain tube (2).

5

Summary of Contents for SST3455I





















Reviews: