31 / EN
Washer-Dryer / User Manual
5.12.4 Time based
drying - minutes
You can select 30, 90 or 150 minutes drying
to reach the desired dryness level at a low
temperature.
C
INFORMATION
• When drying small amount of laundry (2
pieces maximum), select the timed drying
steps in the Cottons or Synthetics drying
programmes.
• If the laundry has not reached the desired
dryness level at the end of the drying
programme, you can select timed drying to
end the process.
• When this function is selected, the machine
performs drying for the adjusted time
irrespective of the drying level.
5.13 Time display
While the programme is running, the time
remaining to the end of the programme will be
displayed in hours and minutes, e.g. “01:30”.
C
INFORMATION
• Programme time may differ from the values
in section "Programme and consumption
table" depending on the water pressure,
water hardness and temperature, ambient
temperature, amount and the type of
laundry, auxiliary functions selected and the
changes in the mains voltage.
5.14 End Time
-
With the
End Time
function, start of the
programme can be delayed up to 24 hours.
After pressing the
End Time
button, the
programme's estimated end time will be
displayed. If an
End Time
is set, the
End Time
light will turn on.
To ensure that the End Time function is enabled
and the programme ends at the end of the
defined duration, you should press
Start /
Pause
after setting the duration. The
Start/
Pause
button will stop flashing and remain on.
If you want to cancel End Time function, press
the
End Time
button until the End Time light
turns off or press the
On/Off
button to turn off
and on the machine.
1. Open the loading door, place the
laundry and add detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if
required, the auxiliary functions.
3. Press the
End Time
button to set the desired
end time. The
End Time
light will turn on.
4. Press the
Start / Pause
button.
Countdown will start.
C
INFORMATION
• Do not use liquid detergents when you
enable the End Time function! Stains might
remain on the clothes.
• The door will remain locked during the End
Time countdown. If you want to unlock
the door, press the programme start/
pause button to switch the machine to
pause mode. At the end of the countdown,
End Time indicator turns off, washing
cycle starts and the time of the selected
programme appears on the display.
5.15 Starting the programme
1. Press the
Start/Pause
button
to start the programme.
2. The flashing light of the
Start/Pause
button will remain on, indicating that
the programme has started.
3. Loading door will be locked. When
the door is being locked, “Locking
Door” warning will be displayed.
Summary of Contents for LRF1854311W
Page 1: ...Washer Dryer User Manual LRF1854311W 2820530232_EN 26 05 22 15 47 Document Number...
Page 47: ......
Page 48: ......
